Re: should I get windows 10
Finally got the paste, and the stuff's gone bad
Instead of thick white stuff, its clear fluid that spilled all over
This is going to kill me
Got good paste, smeared it on in a lovely X pattern and crushed it with my heatsink
No fires have resulted from the CPU or the crap I spilled last night
Cool
Back to work, I horsed around with CHKDSK some more
Tried scanning C, and it reported there was only like 100 MB on that drive. That's probably really bad I thought.
But then I looked at my other drives.
C is extremely tiny because that's not where anything is. Windows and all my of (from the looks of it) intact files are actually on E.
I'm dead sure everything was on C. I have no goddam clue how this happened, or if it's what's wrong. Using CHKDSK on E now and it's taking a suitably long time.
Am I getting dementia? Is my computer? Is this some crazy shit with transposed letters over multiple universes like the Berenstain Bears?
So I'm pretty sure I know that's what's wrong now. The USB drives all seem to have weird lettering now too.
I poked around, trying to see if there's a way to change the drive Windows is on. Sort of, it's not easy. I did try it, it involved bugging around with some boot files, during which I renamed a critical file. I could only assume that the next step I had to do in the process was going to recreate it, but it just hung there so I cancelled it. Windows can't boot anymore, but I'm pretty sure if I just renamed that file back I'd be where I was. But, trying to boot into Windows hasn't worked for a week anyway, so I just left it as is.
I found my external drive had system images from May 2 this entire time. I guess I should've remembered that when the first backup I did ended up filling half of the drive.
So I used Command Prompt and manually picked out all the files I modified after that onto a USB stick.
I wanted to be absolutely sure of what I was doing, so I spent hours reading into how you can look into a system image file and see what's in it. Turns out, you don't need to mount it from the partition manager tool like you did in Windows 7. I kept trying that though. I had to restart twice so it'd stop complaining my admin account didn't have permissions. And then once you successfully do that, there's no files inside. Back to researching.
In Windows 10, all you have to do to get a system image open is double click it. Which basically mounts it anyway, but NOW the files aren't invisible. But all was not good yet, as the folders I needed to get at would load extremely slowly, and just as they were about to finish, stop loading entirely.
Nothing online helped me with that, so I had to find out myself it was some weird permissions issue.
But I did finally see everything on the image, it's all there and it's all good. I compared folders to folder DIR readouts from my computer. I can make it out of this without any loss if I do this right. My HDD could be perfectly fine too, though it is six years old and that's probably not entirely true.
I'd like to just copy the entire system image to the laptop so I have it on more than one location, but the hard drive on this is literally too small for it.
Back to advanced start up, so I can load the system image and recover. Nope, external drive has a built in password system. Gotta figure out how to turn that off so Windows can find the image on it.
Windows finds the image and it gets ready to install. Nope, recovery environment is somehow not the same OS as what's on the computer. The computer and the laptop I made the recovery environment with are using the same versions of Windows 10, so I can only assume it's because different computers made the recovery and images. Which is stupid because I can't use the computer that made the images to do anything else besides command line functions at this point.
I also tried using the network options to get the image installing, but those don't really work over a Homegroup which the computer is no longer a part of. The driver option didn't help either because it just complained at me as soon as I tried picking the first one. I also had the idea to copy the image back onto the computer using command line, but the disk here would also not be able to hold all my stuff, plus another copy of it all.
I put the upgrade tool I downloaded from Microsoft back on the USB and, surprise, it's showing what it's supposed to show when it boots now: an install and repair option. Repair brings me to the same advanced start up stuff that I have thoroughly troubleshooted with already, with the added bonus of command line no longer finding anything on any drives on the computer, or being able to fix what I changed to the boot folder this morning.
If that's different, I reason maybe some of the other tools are too. Resetting the PC does not work now because apparently the drive with Windows on it is "locked". System Restore tells me I need to pick which OS to use, even though it didn't give me a choice at first like before. System Image continues to be inexplicable. I'm not even gonna try clicking on Startup Repair just for it to tell me it can't do anything.
I'm really close to fixing this now, I just need a way for Windows to actually wipe itself clean and delete all my files of the computer. (against every instinct I have) I really hope I never have to clean off perfectly good files from a computer again, it's really stressing me out that I could do it all for no reason whatsoever and lose it all because of a command I myself gave the computer.
For this reason I have the system image open and copying some smaller folders onto the laptop to reassure me. Now, I just need some way to clean all this up.